Reasons and solutions for insufficient working pressure of cleaning machines

A cleaning machine is used to clean the air pollutants that are converted or invaded during the entire process of production, installation, application, and maintenance of hydraulic transmission systems; It can also be applied to the maintenance and care of hydraulic oil in work, improve cleanliness, prevent or reduce common failures caused by environmental pollution, and ensure the excellent performance, high reliability, and long service life of hydraulic transmission system machinery and equipment.

If the cleaning machine is turned off after use and does not boil water, the gun and pipes may have ice and work pressure. Only at this time can you fire a gun and drain the water from the gun and pipeline to relieve work pressure.

First, check if the nozzle is damaged; If damaged, please replace the nozzle; Is the filtering device blocked? Clean and replace the filtering device; Remove the cleaning machine nozzle, start the equipment, and check if the water sprayed from the spray gun is normal. If the water output is normal, reinstall the nozzle and check if the equipment has working pressure. If there is still no working pressure, it indicates that the pressure reducing valve is damaged or the sealing of the high-pressure water pump is damaged.

The reason for insufficient working pressure of the cleaning machine and its solution: The stainless steel nozzle of the ultra-high pressure cleaning machine is severely damaged. Excessive damage to the stainless steel nozzle can harm the water output and working pressure of the machine equipment. It is necessary to immediately remove and replace the nozzle with a new one. Insufficient inflow and outflow of connected machinery and equipment results in insufficient water output, leading to insufficient working pressure output. The problem of reduced working pressure in terms of water output can be addressed by immediately supplying sufficient inflow and outflow. The ultra-high pressure cleaning machine should clear the gas entering the filter and ensure the output of the standard water output working pressure after exhausting the gas entering the filter.